The iBox is the heart of the iEFIS system, and the conductor in the symphony of communication between all system devices and the iEFIS screens. The iBox contains the GPS engine (with antenna connection), the pitot/static sensors and Angle of Attack sensors. The iBox is the hub of communication for all the system devices (AHRS, RDAC, Autopilot Servos) and is also the hub of communication with all third party devices (radios, transponders, ADS-B, VP-X) via its RS-232 and ARINC interfaces.

One iBox is necessary in every iEFIS system, and in cases where maximum redundancy is required, a 2nd iBox can be added to the system. The 2nd iBox acts as a ‘hot standby’ and is ready to take over all iBox tasks automatically when necessary, or on command by the pilot.

Click on the DB-25 connectors above to see more information on those connectors.

The Power Connector (pigtail harness included with every iBox):
The iBox can be powered by 1 or 2 Power Sources (as in the case of a backup battery system). It also has a Keep Alive Power input that maintains date and time and some non-volatile memory items without using the CR2032 battery, which can result in up to 10 years of life on the CR2032 eliminating the need to change this battery every year. The Outside Air Temp sensor also connects to the Power connector.

The CAN Connector (pigtail harness included with every iBox):
The iBox features 2 CAN buses (CAN 1 and CAN 2). The system devices can be split up in any way on each of the CAN buses.

OAT Probe
Our aluminum OAT probe is included with every iBox

GPS Antenna
Our tuned GPS Antenna is included with every iBox (inside mount)

EFIS LAN coax
An RG-174 EFIS LAN coax cable is included with each system

You cannot add "Rotax 912/915 iS Sensor Kit" to the cart because the product is out of stock.

Click to enlarge

Previous product

Clamp Style EGT Probes - Michigan Avionics

Type-K EGT Thermocouple, Clamp Type $42.00

Back to products

Next product

Type-K CHT Bayonet, 3/8"-24 $38.00

Type-K CHT Thermocouple for Spark Plugs

Name: Type-K CHT Thermocouple for Spark Plugs
SKU: 1419
Price: 29.00 USD
Availability: InStock

$29.00

For Experimental and LSA Use Only!

Compare

Add to wishlist

SKU: N/A Category: EMS

Description

Currently offering four different versions of our CHT probes. These are all “K-type” thermocouples and they come in sizes 10mm, 12mm, 14mm and 18mm. The sizes refer to the thread diameter of the spark plug the probes are used on. Most automotive engines use 14mm plugs, the Jabiru engine and Rotax 912/914 use 12mm plugs. The big Lycomings and Continentals use 18mm plugs. Some motorbike engines use small 10mm plugs. The probes are supplied with 3 ft of Teflon insulated cable, heat resistant to 300 degrees C.

Additional information