The iBox is the heart of the iEFIS system, and the conductor in the symphony of communication between all system devices and the iEFIS screens. The iBox contains the GPS engine (with antenna connection), the pitot/static sensors and Angle of Attack sensors. The iBox is the hub of communication for all the system devices (AHRS, RDAC, Autopilot Servos) and is also the hub of communication with all third party devices (radios, transponders, ADS-B, VP-X) via its RS-232 and ARINC interfaces.

One iBox is necessary in every iEFIS system, and in cases where maximum redundancy is required, a 2nd iBox can be added to the system. The 2nd iBox acts as a ‘hot standby’ and is ready to take over all iBox tasks automatically when necessary, or on command by the pilot.

Click on the DB-25 connectors above to see more information on those connectors.

The Power Connector (pigtail harness included with every iBox):
The iBox can be powered by 1 or 2 Power Sources (as in the case of a backup battery system). It also has a Keep Alive Power input that maintains date and time and some non-volatile memory items without using the CR2032 battery, which can result in up to 10 years of life on the CR2032 eliminating the need to change this battery every year. The Outside Air Temp sensor also connects to the Power connector.

The CAN Connector (pigtail harness included with every iBox):
The iBox features 2 CAN buses (CAN 1 and CAN 2). The system devices can be split up in any way on each of the CAN buses.

OAT Probe
Our aluminum OAT probe is included with every iBox

GPS Antenna
Our tuned GPS Antenna is included with every iBox (inside mount)

EFIS LAN coax
An RG-174 EFIS LAN coax cable is included with each system

Sold out

Click to enlarge

Previous product

Lycoming 4 cyl Sensor Kit - Michigan Avionics

Lycoming - Continental 4cyl Sensor Pack From: $632.25

Back to products

Next product

Rotax 912 ULS Sensor Kit From: $548.17

Rotax 914 Sensor Kit

From: $554.85

Rotax 914 4cyl Engines

Compare

Add to wishlist

Categories: Accessories, EMS

Description

This package includes the sensors needed to install your Rotax 914 engine to the RDAC and for use with MGL Avionics instruments including the iEFIS system.

Additional information

Type-K EGT Thermocouple, M8 x1 Thread

Brand	MGL Avionics

Electronics International Fuel Flow Transducer FT-60

Brand	Electronics International

UMA Fuel Pressure Sender

Pressure Range	0-7 PSI
Brand	UMA

Magnetic Current Sensor for EFIS

Brand	MGL Avionics

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Rotax 914 Sensor Kit”

You must be logged in to post a review.

No account yet? Create an Account

Scroll To Top

Rotax 914 Sensor Kit

Type-K EGT Thermocouple, M8 x1 Thread × 4

Electronics International Fuel Flow Transducer FT-60

UMA Fuel Pressure Sender

Magnetic Current Sensor for EFIS

Type-K EGT Thermocouple, M8 x1 Thread

Electronics International Fuel Flow Transducer FT-60

UMA Fuel Pressure Sender

Magnetic Current Sensor for EFIS

Reviews

Type-K EGT Thermocouple, M8 x1 Thread

Type-K EGT Thermocouple, Clamp Type

XTreme EFIS / EMS

Electronics International Fuel Flow Transducer FT-60

Capacitance Fuel Level Sender

Rotax 912 ULS Sensor Kit

Type-K CHT Thermocouple for Spark Plugs

Magnetic Current Sensor – Closed Loop

Rotax 914 Sensor Kit

Type-K EGT Thermocouple, M8 x1 Thread × 4

Electronics International Fuel Flow Transducer FT-60

UMA Fuel Pressure Sender

Magnetic Current Sensor for EFIS

Email when stock available

Type-K EGT Thermocouple, M8 x1 Thread

Electronics International Fuel Flow Transducer FT-60

UMA Fuel Pressure Sender

Magnetic Current Sensor for EFIS

Reviews

Related products

Shopping cart

Sign in